SOC 2 Type 2 CORE Audit Journey with Sensiba
Understanding Your Audit Journey
Once you have completed onboarding and met the minimum readiness requirements, your audit will move through several stages from preparation and testing through to final report issuance.
This guide explains what to expect throughout the audit, what your team may need to action, and how you can help keep the process moving efficiently.
Understanding audit timelines
We understand that many organizations are working towards customer commitments, procurement requirements, contractual obligations, or other compliance-driven deadlines.
While we always strive to progress audits as efficiently as possible, timelines can vary significantly between engagements. The stages below are intended to provide visibility into the audit journey rather than indicate fixed timelines or guaranteed completion dates.
Factors that may influence timing include:
- Frameworks being audited
- Scope and complexity of your environment
- Quality and completeness of evidence
- Number of controls requiring assessment
- Extent of any remediation required
- Responsiveness of key stakeholders throughout the engagement
Tip: Once your initial results have been provided, one of the most effective ways to keep your audit moving is to respond promptly to auditor requests and notify your audit team whenever new evidence has been uploaded for review.
1. Onboarding and audit preparation
Your Customer Success Manager will help prepare you for the audit by:
- Confirming your audit scope
- Identifying key points of contact
- Agreeing on preferred communication methods
- Sharing onboarding and readiness resources
- Outlining access requirements
- Supporting completion of the Quick Start Guide
- Helping ensure your compliance platform is configured appropriately
2. Audit readiness confirmation
Before your audit can begin, your Customer Success Manager will confirm that the minimum readiness requirements have been met.
These include:
- Critical systems connected in your GRC platform
- Personnel information configured
- Policies published and approved
- Auditor access provisioned
- Audit scope confirmed
3. Meet your Lead Auditor
Once readiness is confirmed, you will be introduced to your Lead Auditor, who will oversee your engagement through to report issuance.
Your auditor will become your primary point of contact for audit-related questions, evidence requests, and audit progress.
4. AI-assisted assessment
Sensiba uses an AI-assisted review process to assess your compliance platform configuration and available evidence against the relevant audit framework.
This initial assessment helps identify controls that appear complete, highlight potential gaps, reduce manual audit effort, and accelerate the initial review process.
How is customer data handled?
All AI-assisted audit activities are performed using Sensiba's proprietary in-house AI platform. Customer data is processed within Sensiba's controlled environment and is not shared with or transmitted to external AI providers or third parties.
5. Auditor review
Your Lead Auditor and audit team will review the AI findings alongside the evidence collected, compliance platform configuration, and supporting documentation.
While AI assists with the initial assessment, every control is reviewed and evaluated by your assigned audit team. All audit conclusions and final determinations are made through human review to support accuracy, consistency, and professional judgement.
The duration of this stage can vary depending on the frameworks in scope, number of controls, evidence quality, and complexity of your environment.
6. Initial results and additional evidence
Once the initial review is complete, your auditor will:
- Share the outcome of the initial review
- Identify controls requiring additional evidence or clarification
- Provide guidance on next steps
- Communicate outstanding evidence requests through your GRC platform for your review and action
Please note: A control marked as incomplete does not mean that the control has failed. It means additional evidence or clarification is required before the assessment can be completed. This is a normal part of the audit process.
Where further information is needed, your auditor will provide instructions outlining what is required, why it is needed, and how it should be provided.
7. Submit evidence and notify your auditor
As additional evidence becomes available, upload it to your GRC platform as instructed.
Once uploaded, notify your auditor through your agreed communication channel, such as email or Slack where applicable, so they know the evidence is ready for review.
Proactively notifying your auditor when new evidence is available is one of the most effective ways to keep your audit moving and avoid unnecessary delays.
8. Quality assurance review
Once all controls are complete and the audit reaches 100%, the engagement enters a secondary internal quality assurance review.
This review helps ensure testing is complete, supporting evidence is appropriate, and internal quality standards have been met.
Additional clarification or evidence may be requested during this review, and timing can vary depending on the complexity of the engagement.
9. Audit completion
Once the quality assurance review has been completed successfully, your auditor will confirm that audit fieldwork has been finalized and the engagement can move into reporting.
10. Draft report preparation and review
Your audit team will prepare your draft report and complete an internal review before sharing it with your organization.
You will then receive the draft report for review. Your team should review the report carefully, identify any inaccuracies, and request amendments where required.
11. Management Representation Letter
Once your team has approved the draft report, the Management Representation Letter (MRL) must be signed and returned before the final report can be issued.
A letter covering your Management Representation, Management Assertion, and Subsequent Events confirmation will be issued via Box Sign for electronic signature.
It should be signed by an authorized representative of your organization. If the authorized signatory is different from your primary audit contact, let your audit team know so the request can be sent to the appropriate person.
12. Management review and final report issuance
Once your team has approved the draft report and returned the signed and dated Management Representation Letter, your auditor will submit the materials for final management review and approval.
Following final approval, you will receive your final report and applicable completion materials, which may include:
- Attestation letter(s)
- Badges, where applicable
- Completion pack or supporting materials
13. Planning your next audit
Your compliance journey does not necessarily end when your report is issued.
Your Customer Success Manager will work with you to confirm future audit dates, review any changes to scope, and help you prepare for your next audit cycle.
Need documentation while your audit is underway?
If you need confirmation of your audit journey for customers, prospects, stakeholders, procurement teams, or compliance purposes, Sensiba may be able to provide supporting documentation depending on the stage of your engagement.
Available options may include:
-
Engagement Confirmation Letter - Confirms that Sensiba has been engaged to perform your audit.
-
Audit Status Confirmation Letter - Provides a high-level update on the current status and overall progress of your audit.
-
Bridging Letter Template - Helps address the period between SOC 2 reports by confirming whether material changes have occurred to your organization's controls, systems, or security posture since the end of the most recent reporting period.
Contact your Customer Success Manager to discuss which documentation may be available based on your engagement stage.
Who should I contact?
Before your audit starts - your Customer Success Manager is your main point of contact for:
- Onboarding and readiness
- Audit scope
- Engagement logistics
- Changes to your engagement
- Additional frameworks
- Contract renewals
- Planning future audit cycles
- Evidence requests and clarification
- Audit progress
- Testing and review questions
- Audit completion status
- Draft report review
- Management Representation Letter questions
- Reporting and final issuance
Once your audit is underway - your Lead Auditor becomes your primary point of contact for:
-
If your audit scope changes - Contact your Customer Success Manager if there are changes to your frameworks, systems, locations, services, or other engagement details.
-
If you're interested in another framework - Contact your Customer Success Manager to discuss adding another framework or planning a future engagement.
-
For renewals or future audit planning - Your Customer Success Manager can assist with renewal discussions, contract options, future audit timing, and planning your next audit cycle.
-
For questions about your draft or final report - Contact your Lead Auditor for questions relating to your draft report, Management Representation Letter, final report, attestation letters, or other reporting deliverables.
For supporting documentation
Contact your Customer Success Manager if you need an Engagement Confirmation Letter, Audit Status Confirmation Letter, or Bridging Letter Template. Availability will depend on the stage of your engagement.